The water is deeper than about an inch
Through the final dry check, about an inch is the practical ceiling for a wet vacuum, and that is for clean water.
Clean, gray, and contaminated water
Georgia
Our water-damage technicians extracts sewage water, removes unsalvageable materials, and cleans and sanitizes the affected area before structural drying.
Signs to look for
As moisture readings guide drying, if you notice any of these problems, call us before water has more time to spread into nearby materials.
Through the final dry check, about an inch is the practical ceiling for a wet vacuum, and that is for clean water.
To control the wet boundary, toilet paper, wipes and waste solids clog a standard submersible pump within minutes.
As moisture readings guide drying, if the route from the wet area to the door runs over carpet, wood or a living room, the removal is the moment contamination spreads.
As moisture readings guide drying, the question of where the water goes is settled before extraction starts, not during.
As moisture readings guide drying, removing water from a space that is still receiving it wastes the effort.
To control the wet boundary, low clearance spaces have no floor drain, poor access and a vapor barrier that traps liquid in pockets.
What happens
Our water-damage technicians adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
As moisture readings guide drying, power to the area is switched off from a dry location before a crew enters.
From the source check, we identify where the contaminated water is going first.
Through the final dry check, before anything is carried out, the route from the wet area to the truck is covered with sheeting or corrugated floor protection and marked as one way.
As moisture readings guide drying, the affected area is closed off and a doffing station is set at the edge, where personal protective equipment comes off and goes into sealed waste bags.
To control the wet boundary, clear liquid can be moved with a submersible pump, while water carrying solids needs a trash pump or a solids handling pump that will pass debris.
From the source check, once the depth is below what a pump can lift, extraction moves to a truck mounted extractor or a self contained unit with a sealed waste tank.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
From the source check, here is how we usually handle sewage water removal near Georgia.
To control the wet boundary, depth and whether there are visible solids decide which pumps come on the truck.
Your callAs moisture readings guide drying, all water use in the building stops, including anything on a timer such as a washing machine or a water softener.
+5 minutesAs moisture readings guide drying, young children, pets, older adults and anyone whose immune system is compromised stay clear of the affected space and of the route out.
+10 minutesFrom the source check, do not use a shop vacuum, a mop or a squeegee, and do not push water toward a drive or a drain.
+15 minutesAs moisture readings guide drying, on arrival a crew measures the depth, records the conditions with photographs, and confirms where the water will be discharged or hauled.
On arrivalTo control the wet boundary, floor protection goes along the route, sealed work area closes the affected area, and the doffing station is set at the boundary.
First hour on siteThrough the final dry check, pumps sized for the material move the standing volume into sealed tanks or to the agreed discharge point.
First hours on siteUnderstanding the cost
As moisture readings guide drying, we explain the recommended work and price before you approve the job. As moisture readings guide drying, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Sealed extraction and disposal of sewage water, one bathroom or utility room | Through the final dry check, national estimate for removal only. To control the wet boundary, cleaning, disinfection and drying are separate stages. | $600 to $1,800 |
| Sealed pump out and extraction, two to four inches of sewage over a basement floor | Through the final dry check, national estimate for removal only, including solids handling and controlled disposal. | $1,500 to $4,000 |
| Sewage water removal priced by affected area | From the source check, national estimate for contaminated water work. Through the final dry check, used when the full sequence of removal, cleaning and drying is priced together. | $7 to $15 per square foot |
| Contaminated waste hauling to a controlled disposal point, per sealed liquid tank load | Through the final dry check, national estimate per sealed tank load. To control the wet boundary, distance to an approved disposal point drives the spread. | $200 to $600 |
| Standby pump plus monitoring while inflow continues, per day | From the source check, national estimate for equipment left on a float switch with return visits until the source is fixed. | $150 to $350 |
| After hours or overnight dispatch charge | To control the wet boundary, national estimate for an out of hours start. To control the wet boundary, you are told the figure before a crew leaves. | $100 to $400 |
Volume and depth of standing water
To control the wet boundary, a shallow film over a bathroom floor is a wand job.
How much of it is solids
Through the final dry check, liquid moves quickly and solids do not.
Distance and difficulty of the route out
Through the final dry check, a walkout basement with a truck at the door is fast.
Where the water can legally be discharged
To control the wet boundary, a sanitary sewer cleanout on the property, where discharge to it is permitted, is the cheapest route.
Protection of the areas we pass through
As moisture readings guide drying, sheeting, corrugated floor protection, tack mats and doorway guards are consumed on every job.
Saturated soft goods that have to be extracted before removal
Through the final dry check, carpet and padding are extracted in place so they can be carried without dripping.
Why timing matters
To control the wet boundary, water can keep moving into nearby materials even when the surface looks dry.
As moisture readings guide drying, boots, dripping carpet and dragged hoses carry material into hallways, stairs and living rooms. To control the wet boundary, those areas then need cleaning that was never in the original drying plan.
To control the wet boundary, storm systems usually run straight to a creek, a river or a lake with no treatment at all.
As moisture readings guide drying, it is not built for volume and it is not built for contaminated water, so it clogs, it aerosolizes what it does pick up, and it becomes contaminated equipment sitting in your garage.
To control the wet boundary, bacterial load rises quickly in warm still water and the smell follows it.
Helpful service information
From the source check, start with the short explanation. To control the wet boundary, open a card if you want a little more detail.
As moisture readings guide drying, contaminated liquid moves from the floor into a closed waste tank without being sprayed, aerosolized or exposed to the room.
As moisture readings guide drying, sealed extraction is the phrase that separates this work from ordinary pumping. As moisture readings guide drying, contaminated liquid moves from the floor into a closed waste tank without being sprayed, aerosolized or exposed to the room.
Through the final dry check, contaminated water is contained and taken to controlled disposal.
Through the final dry check, where the water goes is a decision with legal weight, and it is made before extraction starts.
To control the wet boundary, the affected area is contained and a single one way route is established, covered with sheeting or corrugated protection.
To control the wet boundary, protecting the unaffected parts of a building is a removal problem more than a cleaning problem, because removal is when material travels.
Help near you
Choose your area below, or call (877) 734-0262 and describe what happened.
You may also need
Our water-damage technicians removes sewage water and damaged materials, then cleans and sanitizes affected rooms to address contamination and lingering odors.
Get a Quote: (877) 734-0262Our water-damage technicians handles water from a blocked or failed sewer line with extraction, contamination control, material removal, cleaning, and sanitation.
Get a Quote: (877) 734-0262Our water-damage technicians contains and removes septic backup water, disposes of contaminated materials, and cleans and sanitizes affected rooms.
Get a Quote: (877) 734-0262Our water-damage technicians removes heavily contaminated water and damaged materials, then cleans and sanitizes affected rooms to reduce serious health risks.
Get a Quote: (877) 734-0262Our water-damage technicians identifies, contains, and removes contaminated water, followed by cleaning and sanitation appropriate for the source and affected materials.
Get a Quote: (877) 734-0262Our water-damage technicians contains and removes Category 3 water, then cleans, sanitizes, and disposes of materials that cannot be safely restored.
Get a Quote: (877) 734-0262Our water-damage technicians removes standing water from floors and low areas, then checks nearby materials for hidden moisture and begins drying.
Get a Quote: (877) 734-0262Our water-damage technicians uses pumps to remove deep standing water quickly, followed by detailed extraction and moisture checks around affected areas.
Get a Quote: (877) 734-0262Common questions
Through the final dry check, two reasons. As moisture readings guide drying, about an inch is the practical limit for a wet vacuum even with clean water, so it cannot handle the volume.
From the source check, to a sanitary sewer cleanout on the property where discharge to it is permitted, or hauled off in sealed tanks to a controlled disposal point.
Through the final dry check, storm drains usually discharge straight to a creek, river or lake without treatment.
As moisture readings guide drying, pumps take what will pass and the rest is scooped and squeegeed by hand into sealed containers.
From the source check, the route from the wet area to the truck is covered with floor protection and run as a single controlled path.
From the source check, a small hard surfaced room is usually a few hours. To control the wet boundary, several inches over a basement floor with solids and saturated carpet commonly takes most of a day.
As moisture readings guide drying, a bathroom or utility room commonly runs 600 to 1,800 dollars nationally for removal alone.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our water-damage technicians trace homes, businesses, and managed properties throughout Georgia and nearby communities.
View the area on Google Maps